Campbell RavenXTG GPRS/EDGE Guida Utente Scaricare il pdf (Pagina 69)

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 64

AT Commands: Serial

This group includes commands specific to the serial port.

+++

Serial

The commands displayed in Wireless Ace and the results of those commands depends on the

model of the modem. Some of the commands in this section, as noted, are not available in Wire-

less Ace. Many of the commands not available with Wi

reless Ace require PassThru mode to use.

FIGURE 1. Common : Serial

Note: This command is not proceeded by AT nor does it require a carriage return

(enter).

There must be an idle time (set by S50) on the

serial port before and after this com-

mand.

The “+” is ASCII 0x2B.

AT Escape sequence.

If the Raven is in a data mode (any mode other than PassThru), this command causes the modem to re-

enter AT command mode.

Cannot be configured in Wireless Ace.

Note: This command does nothing if DAE=1.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 130 131

Nessun commento

Campbell RavenXTG GPRS/EDGE Guida Utente Pagina 69