
DMM600 Duff Moisture Meter
13
8.2 Microwave Oven Method
For this method a microwave oven is required and sample containers suitable
for use in microwave oven.
Procedure
1. Weigh and record the weight of sample container
2. Place the sample in the container and record the weight of the container
and sample.
3. Place the container with sample in the microwave oven with the heat sink
and turn the oven on for 3 min. The heat sink can be a cup of water
covered with a paper towel. The heat sink absorbs microwave energy
once sample are dry.
4. After the set time has elapsed, remove the container with from the oven.
Allow to cool to allow handling then weigh and record the weight.
5. Carefully stir the sample, taking special precautions not to lose any.
6. Return the container with sample to the oven and reheat in the oven for 1
min.
7. Repeat steps 4 through 6, until weight does not change.
8. Use the final weight determination in calculating the gravimetric water
content.
Calculation of gravimetric water content of the sample using spreadsheet or as
follows:
water content
massof container and wet sample massof container and dry sample
massof container and dry sam ple massof container
=
−
−
*100
Multiply gravimetric water content by bulk density to obtain volumetric water
content.
Commenti su questo manuale