Campbell CS526 Specifiche Scaricare il pdf (Pagina 12)

CS526 ISFET pH Probe

The model number and cable length are printed on a label at the connection end of

the cable. Check this information against the shipping documents to ensure the

correct product and cable length are received.

4. Quickstart

For complete installation, programming, and calibration information, see Sections

7.1 through 7.3.

4.1 Preparation for Use and Installation

1. Soak the CS526 in 7-pH buffer solution for 15 minutes.

2. Follow the calibration procedure outlined in Appendix C, Calibration.

3. Place the CS526 in the liquid being measured. The CS526 ISFET pH probe

can be installed without regard to orientation.

When installing in a well, the #7421 Split Mesh Cable grip is

recommended to centre and suspend the cable, reducing cable

stretch.

4.2 Use SCWin to Program Datalogger and Generate Wiring

Diagram

Short Cut is an easy way to program your datalogger to measure the CS526 and

assign datalogger wiring terminals. The following procedure shows using Short

Cut to program the CS526.

1. Install Short Cut by clicking on the install file icon. Get the install file from

either www.campbellsci.com, the ResourceDVD, or find it in installations of

LoggerNet, PC200W, PC400, or RTDAQ software.

2. The Short Cut installation should place a Short Cut icon on the desktop of

your computer. To open Short Cut, click on this icon.

NOTE

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Nessun commento

Campbell CS526 Specifiche Pagina 12