Campbell Raven II Guida Utente Scaricare il pdf (Pagina 31)

SAA CR Logger Integration Guide

May 2012 26

'>>>>>>>>>>>>>>> START <<<<<<<<<<<<<<<

' Input number of masked segments:

Const NUM_MASKED_SEGMENTS = 0

'>>>>>>>>>>>>>>> END <<<<<<<<<<<<<<<

'>>>>>>>>>>>>>>> START <<<<<<<<<<<<<<<

' Input tilt alarm in degrees

Const TILT_ALARM_COUNTS = 20

'>>>>>>>>>>>>>>> END <<<<<<<<<<<<<<<

'>>>>>>>>>>>>>>> START <<<<<<<<<<<<<<<

' Input reference measurement: (1 = initial readings, 2 = previous readings)

Const REF_MEAS = 2

'>>>>>>>>>>>>>>> END <<<<<<<<<<<<<<<

'>>>>>>>>>>>>>>> START <<<<<<<<<<<<<<<

' Input SAA orientation (1 = horizontal, 2 = vertical

Const SAA1_ORIENTATION = 1

Const SAA2_ORIENTATION = 1

'>>>>>>>>>>>>>>> END <<<<<<<<<<<<<<<

'>>>>>>>>>>>>>>> START <<<<<<<<<<<<<<<

' Input whether or not SAATop is present (0 = not present, 1 = SAATop is present)

Const SAA1_SAATOP = 1

Const SAA2_SAATOP = 1

'>>>>>>>>>>>>>>> END <<<<<<<<<<<<<<<

'>>>>>>>>>>>>>>> START <<<<<<<<<<<<<<<

'Input channel that SAATop is using for communications, 0 to 9, usually 0 in most situations, unless 2 or more

arrays happen to be sharing the exact same serial connection

Const SAA1_SAATOP_CHANNEL = 0

Const SAA2_SAATOP_CHANNEL = 0

'>>>>>>>>>>>>>>> END <<<<<<<<<<<<<<<<<

'>>>>>>>>>>>>>>> START <<<<<<<<<<<<<<<

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Nessun commento

Campbell Raven II Guida Utente Pagina 31