Weather-Resistant Enclosures
Models ENC10/12, ENC12/14, ENC14/16, ENC16/18
Campbell Scientific provides fiberglass-reinforced polyester enclosures for housing our dataloggers and periph-
erals. These non-corrosive, white enclosures are UV-stabilized and reflect solar radiation, reducing temperature
gradients inside the enclosure without requiring a separate radiation shield. Dataloggers and peripherals
housed in an enclosure with desiccant are protected from water and most pollutants.
The NEMA 4X enclosures (modified for cable entry) include a
door gasket, external grounding lug, stainless steel hinge, lock-
able hasp, desiccant, humidity indicators, and sensor cable ties.
An optional CS210 Enclosure Humidity Sensor is available to
monitor relative humidity inside the enclosure. The housings
attach either to a flat surface, vertical mast (1” to 1.5” IPS
Schedule 40 pipe; O.D. 1.00” to 2.00”), tripod, or tower.
Dataloggers, peripherals, and brackets are mounted on
an internal backplate punched with a grid of one-inch-on-
center holes. This mounting scheme simplifies system
configuration and facilitates addition and removal of
equipment in the field.
Models Available
ENC10/12
Campbell Scientific's ENC10/12 enclosure has internal
dimensions of 10” x 12” x 4.5” and weighs 9.0 lbs. It can
house one CR200-series datalogger, power supply, and one
small peripheral. A CR800, CR850, or CR1000 can also be
housed in the ENC10/12 if the #17565 stack mounting kit is
used. For peripherals that are taller, a 10" x 12" enclosure
that has a raised lid is available; contact Campbell Scientific
for more information.
ENC12/14
With internal dimensions of 12” x 14” x 5.5”, the ENC12/14
can house one CR200-series, CR800, CR850, CR1000, or CR3000
datalogger, power supply, and one or more peripherals
(depending on the peripheral’s footprint). It weighs 11.2 lbs.
ENC14/16
This enclosure has internal dimensions of 14" x 16" x 5.5”. It
can house one CR200-series, CR800, CR850, CR1000, CR3000,
or CR5000 datalogger, power supply, and one or more periph-
erals (depending on the peripheral’s footprint).
ENC16/18
Our largest enclosure provides internal dimensions of
16” x 18” x 9” and weighs 17 lbs. It can house one CR200-
series, CR800, CR850, CR1000, CR3000, or CR5000 datalogger,
power supply, and two or more peripherals (depending on
the peripheral’s footprint).
WHEN MEASUREMENTS MATTER
W H E N M E A S U R E M E N T S M A T T E R
®
CAMPBELL SCIENTIFIC, INC.
DO NOT EAT
UNITED DESICCANTS-GATES
101CH
RISTINE, BELEN
, NE
W
M
EX
ICO
87002
DESI PAK
SPECIFIC
ATIO
N M
IL-D
-3464 TYP
E I &II
R
EA
CTIV
ATIO
N TIM
E IN-BA
G
16 HO
UR
S AT 250 F
D
ES
IC
CAN
T
ACTIVA
TED
BAG
G
ED
FO
R
C
O
N
TEN
TS
4
UN
ITS
PAC
KAGE
USE
AND
S
TA
TIC
D
EH
UM
IDIFIC
ATIO
N
DO NOT EAT
UNITED DESICCANTS-GATES
101C
H
RISTINE
, BELEN
, N
EW
M
E
XICO
87002
DESI PAK
SPEC
IFICATION
M
IL-D
-3464 TYPE
I &II
REACTIVATIO
N
TIM
E IN
-BAG
16 H
O
U
RS
AT 250 F
D
ESICC
ANT
AC
TIVATE
D
BA
GG
ED FOR
C
O
NTEN
TS
4
U
NITS
PAC
KA
G
E U
SE
AN
D STATIC
D
EHU
M
IDIFIC
ATIO
N
INDICATORHUMIDITY
MS20003-2
EXAMINE
ITEM
IF PINK
CHANGE
DESICCANT
IF PINK
WARNING
IF PINK
AVOID METAL CONTACT
DISCARD IF CIRCLES OVERRUN
Humidial Corp., Colton Calif.
The enclosure supply kit is shipped with our enclo-
sures. It includes dessicant, a humidity indicator
card, cable ties, wire tie tabs, putty for sealing the
conduit, and screws and grommets for attaching
peripherals to the enclosure backplate.
The backplate provides a grid of one-inch-on-center holes
for mounting dataloggers, peripherals and brackets.
The optional CS210 Enclosure Humidity Sensor
contains an Elan HM2000-series precision bulk
polymer relative humidity sensor. The desiccant
should be exchanged when the sensor indicates an
RH level of 40% or more inside of the enclosure.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale